SUPER WHITE

Product Sheet

Product Analysis Report

Performance Constancy Certificate

Main Constituents

Clinker ≥ 95 %
Additional minor constituents < 5 %
Setting time regulating calcium sulfate

Chemical Requirements

Loss of Ignition ≤ 5 %
Insoluble Matter ≤ 5 %
SO3 ≤ 4,0 %
Cl ≤ 0,10 %

Physical Requirements

Initial setting time (min.) ≥ 45
Soundness (mm) < 10
Whiteness ≥ 85%

Mechanical Requirements

Compressive Strength Development
Minimum Values
2 days: 30,0 Mpa
28 days: 52,5 Mpa

Advantages

High early strength/high final strength
Short molding time
Minimum 85 % whiteness value
Stable color tone
Suitable open time period
High workability

Recommended Applications

Precast Concrete

It is suitable for precast and prestressed concrete production with its early and final high strength. Smooth surfaces are obtained thanks to suitable particle distribution.

Construction Chemicals

With its long open time and workability, it is suitable for the production of joint filler, tile adhesive and various construction chemicals

Tile, Curbstone and Keystone

With its stable color tone, it is suitable for the production of elements such as paving stones, borders, urban furniture.

Availability and Delivery

Bagged (25 kg, 50 kg)
Palletised (25 kg/1,4 Ton - 50 kg/1,5 Ton)
Bigbag (1 Ton/1,2 Ton - 1,25 Ton/1,5 Ton)
Slingbag (50 kg/1,5 Ton - 25 kg/1,25 Ton - 25 kg/ 1,5 Ton)
Bulk

Precautions in Application

Follow the standard minimum cement content and maximum water/cement ratio.
Provide adequate protection and cure according to correspondent standards.
Keep framework and scaffolding in place until adequate mechanical strength is obtained.
Ready-mix concrete: avoid long time transportation.
Measures should be taken to prevent crack formation in concrete casting in hot and windy weather.

Not Recommended for

In the productions where high whiteness is required, the desired whiteness may not be obtained when used with aggregates whose color tone is not suitable.
It is not recommended for use in concretes and mass concretes that require low hydration heat.

Environment, Safety and Storage

Wear suitable protective clothing, gloves, eye and face protection equipment.
For detailed safety information, request the “Safety Data Sheet” of the product.
Stock the bulk cements in suitable silos so that they are not exposed to moisture and wind, and the bag cements are stacked in a maximum of 10 rows in the warehouses protected from moisture, wind and cold.